Common Faults

Common Faults

Of the common faults in the hardware, and access to water is the internal parts of the phone, and when you receive one of the devices in this case, the maintenance technician to dismantle all parts of the device to an accurate disclosure of it. Where it starts first draining these parts by hot air (A_i_oar) or by dry spray (ACAI).

After drying these parts, is detected on the plate interior to make sure there are no electrical circuits or capacitors were destroyed, and in case of damage to any part thereof, should be replaced by another, are then grouped the device again to make sure the integrity of his work.

Disadvantages of the common faults of the battery inside the phone, and usually results from use ... Unfortunately, the disadvantages of the battery requires replacement by another, because it can not make any maintenance to them.

Defects due shipping into the phone as a result of the entry stream is not compatible with the internal parts of the phone, sometimes showing some flaws in the shipper, the user extraction private party charger (jack) and connect the charger other unusual (Adaptor) leads to the entry of electrical current high or low to painting interior parts, which affect these parts.

In the case of an imbalance within these circles, can overcome this problem by doing some internal connections - called Bridges - with the objective of avoiding damaged parts within the interior painting, or change the Socket in the case of shipping damage.

Energy or stop the network:

When detected on some devices that are showing the separation of defect energy, or the separation of the network, is detected on the internal parts responsible for the delivery of energy to the device or parts of the network.